You are not logged in.

3D-printed parts and accessories

Dear visitor, welcome to Spur Null Magazin Forum. If this is your first visit here, please read the Help. It explains in detail how this page works. To use all features of this page, you should consider registering. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

1

Tuesday, January 8th 2019, 9:34pm

3D-printed parts and accessories

Hello again.
Thought I could start a new thread about 3D-printing different parts and accessories, all in scale 0.
Since 3D-printers are quite cheap today there are many people who have or have access to one.
You don't even have to create things yourself, there's a lot to be downloaded for free.
I will try to provide links to where I got it from, often you will need to create an account
to be able to download, but it is always free for personal use!

Starting with "Outdoor furniture set" from Enely on Thingiverse:
https://www.thingiverse.com/thing:2994789
The original file is in 1/87 but it is very easy to rescale
and here is the result in 1/45, printed with Anycubic Photon resin printer:


This post has been edited 2 times, last edit by "rcmodeler" (Jan 9th 2019, 7:10am)

24 registered users and 1 guest thanked already.

Users who thanked for this post:

Toto (08.01.2019), jörg (08.01.2019), Hexenmeister (08.01.2019), heizer39 (08.01.2019), finkenau (08.01.2019), HüMo (08.01.2019), Altenauer (08.01.2019), 98 1125 (08.01.2019), Bodenbahner (08.01.2019), jbs (08.01.2019), E94281 (08.01.2019), gerdi1955 (09.01.2019), fredduck (09.01.2019), Waldemar (09.01.2019), Wolleschlu (09.01.2019), koefschrauber (09.01.2019), Udom (09.01.2019), George M (09.01.2019), AliSpur0 (09.01.2019), Kpt. Blaubaer (10.01.2019), Regelspur (18.01.2019), LAND ROVER DEFENDER 110 (01.03.2019), Beardiefan (26.03.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

2

Thursday, January 10th 2019, 1:32pm

I have also printed some figures which I found on
https://grabcad.com/library
Same thing here, you need an account to be able to download, but it is free.
Search for "human", "male", "female", "man", "woman" or similar.
Click on "STL" under "Software" and it will show files that are suitable for
3D-printing without going thru CAD-software.
These are scanned real people in scale 1/1 so they are not easy to print
without rescaling :D
Rescaled to 1/45 and printed with resin-printer:




11 registered users thanked already.

Users who thanked for this post:

98 1125 (10.01.2019), Meinhard (10.01.2019), Kpt. Blaubaer (10.01.2019), Altenauer (10.01.2019), jbs (10.01.2019), Udom (10.01.2019), jörg (10.01.2019), fredduck (14.01.2019), Regelspur (18.01.2019), LAND ROVER DEFENDER 110 (01.03.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

3

Monday, January 14th 2019, 8:10pm

Printed two sets of EU-pallets, 40 each time. Files probably from https://www.thingiverse.com/
but I'm not sure. Just search for "pallet", download and rescale to right size.
One on the left is with clear resin, middle is white resin and the right one is painted with Tamiya "wooden deck tan".
Maybe not the best colour but that was what I had. Looks ok. Have to buy more colours :(


Painted a set of outdoor furniture set with the same colour:


15 registered users thanked already.

Users who thanked for this post:

jbs (14.01.2019), Richtprellbock (14.01.2019), Udom (14.01.2019), ivo (14.01.2019), fredduck (14.01.2019), JACQUES TIMMERMANS (14.01.2019), 98 1125 (14.01.2019), Altenauer (14.01.2019), jörg (15.01.2019), Regelspur (18.01.2019), vchiu (07.02.2019), VT 98 (20.02.2019), LAND ROVER DEFENDER 110 (01.03.2019), michl080 (02.03.2019), Peter Kapels (13.05.2019)

Richtprellbock

Rangiermeister

(15)

Posts: 138

Location: NRW

  • Send private message

4

Monday, January 14th 2019, 8:19pm

Hello rcmodeler,

thank you for the pictures - the pallet and the furniture is very good looking!

Kind regards to Sweden

from

Richtprellbock
1 registered user thanked already.

Users who thanked for this post:

Udom (17.01.2019)

Helmutheb

Hilfsbremser

(9)

Posts: 31

  • Send private message

5

Thursday, January 17th 2019, 2:32pm

3D-Printed Items

I have designed quite a variety of Parts in Scale 1:45.The printer of my choice is Shapeways who so far have delivered on time with good quality. There I have etablished my shop, where I offer parts for Guage 0 Railway Fans. Check out this site. If anyone is interested in something special I can design whatever is needed and possible. Feel free to contact me.
Helmut
1 registered user thanked already.

Users who thanked for this post:

Udom (17.01.2019)

Helmutheb

Hilfsbremser

(9)

Posts: 31

  • Send private message

6

Thursday, January 17th 2019, 3:31pm

Ich habe noch vergessen, wie mein shop bei Shapeways heißt:

Euregio Modelle. schaut mal rein
My shop's name at Shapeways is: Euregio Modelle
go there and browse
2 registered users thanked already.

Users who thanked for this post:

Udom (17.01.2019), Altenauer (11.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

7

Friday, January 18th 2019, 4:47pm

Painted some figures with the colours I had at home. Glossy colours are not ideal on figures :thumbdown:
Realized that I need to buy some fine brushes too.


Found a Jerry can at Thingiverse (there are several):


16 registered users thanked already.

Users who thanked for this post:

koefschrauber (18.01.2019), Staudenfan (18.01.2019), Udom (18.01.2019), heizer39 (18.01.2019), 98 1125 (18.01.2019), fredduck (18.01.2019), Alemanne 42 (18.01.2019), jörg (18.01.2019), HüMo (18.01.2019), gerdi1955 (18.01.2019), E94281 (18.01.2019), Regelspur (18.01.2019), Altenauer (22.01.2019), Hexenmeister (22.01.2019), LAND ROVER DEFENDER 110 (01.03.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

8

Tuesday, January 22nd 2019, 5:15pm

Printed some pallet trucks:
17 registered users thanked already.

Users who thanked for this post:

Altenauer (22.01.2019), Hexenmeister (22.01.2019), heizer39 (22.01.2019), 98 1125 (22.01.2019), S0MEC (22.01.2019), HüMo (22.01.2019), PACIFIC 231 (22.01.2019), LAND ROVER DEFENDER 110 (22.01.2019), gerdi1955 (22.01.2019), Udom (22.01.2019), Toto (22.01.2019), E94281 (22.01.2019), hannes 610 (23.01.2019), Olli (23.01.2019), jörg (07.02.2019), fredduck (10.05.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

9

Wednesday, February 6th 2019, 10:05pm

If there is pallets you need a forklift (downloaded from GrabCad and rescaled), link: Forklift


Well, I made two. Most parts will be black so I spraypainted them black


and then paint the other parts in suitable color (have not decided colors yet)
29 registered users thanked already.

Users who thanked for this post:

jk_wk (06.02.2019), HüMo (06.02.2019), Udom (06.02.2019), Hexenmeister (06.02.2019), Wolfg_T (06.02.2019), heizer39 (06.02.2019), jbs (06.02.2019), 98 1125 (06.02.2019), E94281 (07.02.2019), martin (07.02.2019), Masinka (07.02.2019), jörg (07.02.2019), Staudenfan (07.02.2019), Rainer Frischmann (07.02.2019), nullowaer (07.02.2019), barilla73 (07.02.2019), JACQUES TIMMERMANS (07.02.2019), vchiu (07.02.2019), koefschrauber (07.02.2019), Alemanne 42 (07.02.2019), Andy P. (07.02.2019), Altenauer (07.02.2019), George M (07.02.2019), LAND ROVER DEFENDER 110 (01.03.2019), michl080 (02.03.2019), fredduck (10.05.2019), Peter Kapels (13.05.2019), gerdi1955 (13.05.2019), Umsteiger 2 (08.10.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

10

Wednesday, February 20th 2019, 3:59pm

Working on a wireless throttle control that is supposed to be ready for testing in a week or two.
It is a prototype, like most things I seem to make :whistling:
The case is, of course, 3D-printed.


Using DeWalt 10,8V battery


Fits like a glove


Lid with encoder


And mounting holes for Nextion touch display


I re-use code and hardware from my rc-models, so Arduino Nano communicates via nRF24L01
to a similar one, that is connected via RX/TX to a DCC++ base station.
Should work. Hopefully.

The plan is to migrate to wifi, but that will take a while.


Don't look too bad


One hand operation
15 registered users and 1 guest thanked already.

Users who thanked for this post:

Hexenmeister (20.02.2019), Udom (20.02.2019), jk_wk (20.02.2019), Toto (20.02.2019), Altenauer (20.02.2019), heizer39 (20.02.2019), HüMo (20.02.2019), George M (20.02.2019), E94281 (21.02.2019), nozet (21.02.2019), 98 1125 (21.02.2019), LAND ROVER DEFENDER 110 (01.03.2019), Signum (29.03.2019), fredduck (10.05.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

11

Friday, March 1st 2019, 4:26pm

Here is a couple of pics of the display in action.
Startpicture, just for fun, not necessary.
(It's the Z49I'm building, picture from CAD-program)


Next page is "select locomotive". It can control 12 locos at the same time (if the driver can).
My brother have 7 Lenz locos (1-7) and I have 2 (11-12).


Let's choose V 160, then we get to "loco control". Here you can control speed, direction and function F0 - F8.
It is also possible to have the functions in text, different for each loco i you like. I'm only using F0 - F4 for now.


Horn and Telex buttons are "momentary" so you don't have to push twice.
Horn sounds as long as you press the button (as it should be).
Speed is controlled via encoder (the black knob) and press for direction.


If you press "Turnout" button you get to the turnout meny, of course.


Going to test it next week, but it seems to work fine.
Of course there is a lot that can be improved, as usual.
17 registered users and 1 guest thanked already.

Users who thanked for this post:

heizer39 (01.03.2019), 98 1125 (01.03.2019), LAND ROVER DEFENDER 110 (01.03.2019), Udom (01.03.2019), Hexenmeister (01.03.2019), jk_wk (01.03.2019), George M (01.03.2019), HüMo (01.03.2019), Rainer Frischmann (01.03.2019), holger (01.03.2019), Stephan (01.03.2019), jbs (01.03.2019), E94281 (01.03.2019), nozet (02.03.2019), Altenauer (26.03.2019), fredduck (10.05.2019), Peter Kapels (13.05.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

12

Tuesday, March 26th 2019, 11:32am

Just a little quick thing that actually works great. A bumper (prellbock) for Lenz track.
Easy to print and assemble. Cost is almost nothing if you have a 3D-printer.
Printed in white PLA so that is easier to see. Tight fit!

Link to Youtube video:
3D-printed bumper

Edit: Forgot to put a link to the files on Thingiverse:
Bumper





This post has been edited 1 times, last edit by "rcmodeler" (Mar 30th 2019, 1:25am)

17 registered users thanked already.

Users who thanked for this post:

98 1125 (26.03.2019), Staudenfan (26.03.2019), stefan_k (26.03.2019), Altenauer (26.03.2019), nozet (26.03.2019), jbs (26.03.2019), Tom (26.03.2019), Wolleschlu (26.03.2019), jörg (26.03.2019), Hexenmeister (26.03.2019), George M (26.03.2019), E94281 (26.03.2019), Zahn (10.05.2019), fredduck (10.05.2019), Udom (10.05.2019), Peter Kapels (13.05.2019), Umsteiger 2 (08.10.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

13

Friday, May 10th 2019, 11:49am

Another long time project that I am working on, wifi-controlled railway. Just started and it will take a year or two.
First thing, 3d-printed track plan connected to DCC++ master via wifi and mqtt (often used in IOT applications).
The greatest benefit with this is that it is extremely cheap and flexible.
And there is a lot less wiring.

Track plan parts looks like this, 50x50mm.


Can be combined in different ways


The square holes are for rgb-led's, Neopixels. They are quite nice to work with, they are connected in serie (daisy-chained)
so I only use one pin on the mcu to control all Neopixels on the trackplan.




We are going to build four trackplans, one for each station, and I started with the smallest on.
Everything on this trackplan will be controlled by only one mcu called ESP32 with integrated wifi.


For controlling signals, lights, road crossings and other stuff out on the track
there is nifty little device called Wemos D1 mini, cheap and built in wifi.


Here is a part of the smallest station that I use for testing, just two turnouts (and a crossing)


And in action (sorry, but my mobile phone camera doesn't like led's)


The idea is that you can see from a distance which track the turnouts are laid at.
That is nice when you are walking around with a wireless remote control.

It can also be used with track occupancy detection, and maybe have another color if track is occupied.
Just change trackplan software, not hardware.

This post has been edited 2 times, last edit by "rcmodeler" (May 11th 2019, 12:49am)

14 registered users thanked already.

Users who thanked for this post:

Zahn (10.05.2019), Hexenmeister (10.05.2019), jk_wk (10.05.2019), jbs (10.05.2019), JM-HH (10.05.2019), HüMo (10.05.2019), fredduck (10.05.2019), Udom (10.05.2019), George M (10.05.2019), blb59269 (10.05.2019), Altenauer (11.05.2019), ledier52 (13.05.2019), 98 1125 (13.05.2019), Peter Kapels (13.05.2019)

deuxchevaux69

Fahrgast

(10)

Posts: 1

Location: Schweiz

  • Send private message

14

Monday, May 13th 2019, 7:42pm

Hallo rcmodeler
Your 3d-printed parts are great. I've seen other things of yours on youtube. Have you already presented your workbench (and rotated workbench)? How did you make it? Or was she released somewhere?

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

15

Monday, May 13th 2019, 10:40pm

Thank you, deuxchevaux69 :)
No, my workbench is not here or on Thingiverse yet (I totally forgot it :D ).
I'll put it on my to-do list.

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

16

Monday, October 7th 2019, 8:11pm

Ok, it took some time but here is the Simple Workbench V2.
Working on V2 on the Rotating Workbench, will be finished in a month or three ;)

The Simple Workbench is very easy to build, yet very useful.
Not every loco or wagon can be laid upside down on a soft material.

The material is just 1 meter of M8 threaded rod cut in two halves, 0,5 meter each, and 8 M8 nuts.
Plus, of course, some 3d-printed parts that I published on Thingiverse:
Simple workbench

And there is also a short video on Youtube:
Youtube video



12 registered users thanked already.

Users who thanked for this post:

EsPe (07.10.2019), Hexenmeister (07.10.2019), fredduck (07.10.2019), Allgäudiesel (07.10.2019), 98 1125 (07.10.2019), barilla73 (07.10.2019), Seipelchen (07.10.2019), Altenauer (07.10.2019), HüMo (07.10.2019), jk_wk (07.10.2019), jbs (08.10.2019), Udom (11.10.2019)

rcmodeler

Schrankenwärter

(21)

  • "rcmodeler" started this thread

Posts: 38

Location: Sweden

  • Send private message

17

Friday, November 29th 2019, 4:19pm

My brother needed some furniture to a building so I checked on Thingiverse what I could find.
Table and some chairs to the canteen and desk, chair and a couple of cabinets to the office.
Found on several different places on Thingiverse and several different sizes, but it is easy to rescale.





13 registered users thanked already.

Users who thanked for this post:

fredduck (29.11.2019), jbs (29.11.2019), lokmichi (29.11.2019), Hexenmeister (29.11.2019), Altenauer (29.11.2019), koefschrauber (29.11.2019), HüMo (29.11.2019), EsPe (29.11.2019), BahnMichel (29.11.2019), E94281 (29.11.2019), nullowaer (30.11.2019), micha750 (30.11.2019), Udom (03.12.2019)

1 user apart from you is browsing this thread:

1 guests

Similar threads